Hunter Fan 27177 Fan User Manual


 
4 41536-01 1/25/2002
setting up your remote control
installing your batteries
1. Remove the battery cover.
2. Install 4 AA batteries.
setting your remote dip switches
Your dip switches control the radio frequency signal
that is used to control your Hunter ceiling fan. The dip
switches in the remote should be the same as the dip
switches/pin jumpers in the receiver that is installed
in your Hunter ceiling fan.
1. Set the dip switches in the remote to the same
code as the dip switches in the receiver.
2. Replace the battery cover.
Dip Switches