Filter
Top Products
12
42857-01 • 12/04/08 • Hunter Fan Company
Installing the Glass Bowl
7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the
sockets.
7-9. If the fandangle is attached to the extra pull chain, remove it now.
7-10. Attach the extra pull chain (included) to the fan pull chain using
the plastic breakaway connector. (You may nd the plastic
breakaway connector on the end of the extra chain.)
7-11. read the fan pull chain through the hole in the metal disc. en,
thread the fan pull chain through the hole in the center of the glass
bowl.
7-12. read the light pull chain through the hole in the center of the
glass bowl. en, read the light pull chain through the hole in
the center of the cover plate.
7-13. read the fan pull chain through the grommet hole in the side of
the cover plate.
7-14. Place the cover plate up against the
glass bowl. Align the holes in the cover
plate and glass bowl.
7-15. read the light pull chain through
the nial and screw the nial onto the
threaded rod end until tight.
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Breakaway
Connector
Light Bulb
Socket
(B10
Candelabra-
Based 60 Watt
Maximum)
readed Rod
Metal Disc
Glass Bowl
Cover Plate
Finial