Filter
Top Products
7
STORAGE
Tr
TROUBLESHOOTING
1. Disassemble and clean fan
before storing.
2. Keep the original packaging for
the purpose of storing the fan.
3. ALWAYS store the fan in a dry
place.
4. NEVER store the fan while it is
still plugged in.
5. NEVER wrap the cord tightly
around the fan.
6. DO NOT put any stress on the
cord where it enters the fan, as
it could cause the cord to break.
PROBLEM
• Fan will not oscillate.
SOLUTION
• Push down on knob on top of
motor housing to activate
oscillation.
PROBLEM
• Can not adjust the
angle of the fan.
SOLUTION
• Loosen the screw on the side of
the fan neck. Adjust to the
desired angle and tighten the
screw.
If you have tried these
troubleshooting solutions and still
have trouble, call 1-888-830-1326
(For CAN: 1-866-268-1936) or
visit our Web site at http://www.
hunterfan.com.