Filter
Top Products
6
The rinsable pre-filter extends the life of your filter
made with HEPA media by trapping larger airborne
particles before they reach the filter made with HEPA
Media.
The pre-filter is black in color and is attached to the filter
made with HEPA media by hook and loop fastener.
We recommend that you inspect the pre-filter once a
month to ensure that it is clean and therefore working
most effectively. Before inspecting the pre-filter, switch
off the unit, and unplug it from the AC outlet.
2.1 When you observe that the pre-filter is becoming
clogged and requires cleaning, remove the pre-filter
rinsable Pre-filter
2. MaintenanCe
rePlaCeMent of filter Made
witH HePa Media
Your Air Purifier is equipped with a feature that
automatically advises you when your filter made with
HEPA Media needs replacement.
A red light will illuminate reminding you to change
the filter. Replace the filter with Hoover Part Number:
AH60010 and then use a paper clip to press the “Filter
Reset” button next to the red light. Press and hold until
beep occurs and light turns off.
To replace the filter made with HEPA media:
- Switch off the unit, and unplug it from the AC
outlet.
- Remove the rear grille and filter made with HEPA
media.
- Replace the old filter made with HEPA media
ensuring that the pre-filter is aligned correctly.
- Replace the rear grille.
2.1
FILTER MADE
WITH HEPA MEDIA
FOAM PRE-FILTER
WARNING
! !
HIGH VOLTAGE. To reduce the risk of electric
shock - unplug Air Purifier before servicing.
and either gently vacuum it or gently rinse it under
a running tap. (NOTE: Do not use any cleaning
solutions, as these may damage the pre-filter.) Allow
filter to dry.
Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure
continued cleaning effectiveness.
Any other servicing should be done by an authorized service representative.