Filter
Top Products
PREPARING YOUR CLEANER
Insert the main handle in the cleaner body
and then xe it with the screw provided.
To tighten the screw you can use a
standard coin.
CARPET CARE CONTROL SELECTOR
The carpet care control selector raises and lowers the
height of the foot.
For a medium pile carpet, the best carpet cleaning is
achieved by setting the selector to the INTENSIVE CLEAN
position.
For all other types of carpet try various settings until you
get the best result for your carpet.
Ensure that the cleaner is in an upright (parked) position.
Rotate knob to position best suited to depth of carpet
pile.
Note: Using this cleaner for loop carpets or carpets
with pile greater than 30mm is not recommended.
Please consult the floorcare/carpet manufacturer’s
recommended cleaning instruction before vacuuming.
!
IMPORTANT! When cleaning hard floors
such as vinyl or linoleum, move the selector
knob to the HARD floor position. Failure to
do so may cause damage to the floor
surface.
CLEANER RELEASE
Unlock the cleaner by pressing down on the left pedal
with your foot.
POWER SWITCH
To switch the cleaner on or off press down on the right
pedal with your foot.
- 4 -
* Certain models only
RELEASE
Breeze manual.indd 4 5/1/2012 2:03:17 PM