Filter
Top Products
13.Carpet height control:
slide knob to correct
setting for height of
carpet being cleaned.
14.Headlight
15.‘Dirt FINDER’ display*
16.Embedded ‘Dirt FINDER
’
sensitivity switch*
17. Check bag indicator
18. Bag door
19.Cord hooks: wrap
cord around hooks for
storage. The top hook
can be rotated right or
left for easy cord
release.
20.Carrying handle
21. Wands
22. Dusting brush
23. Furniture nozzle
24. Crevice tool
*some models only
The assembled cleaner will
look like the drawing.
1. Handle
2. Self-propel button
3. ON-OFF switch
4. Hose
5. Tool cover
6. Powered hand tool
7. Final filter door
8. Handle release lever:
step on lever to lower
handle to operating or
low positions.
9. Edge groomers
10. Furniture guard: helps
prevent cleaner from
marking furniture.
11. Automatic brush roll
indicator*: shows when
brush roll is rotating or
stopped.
12. Brush roll control:
slide control to “Carpet”
for cleaning with brush
roll ON or to “Hard”
for cleaning with brush
roll OFF.
5
2-2
2-3
ON-OFF Switch
Plug cord into electrical outlet.
To turn cleaner ON, push switch up.
To turn cleaner OFF, push switch down.
Note: To reduce the risk of electric
shock, this appliance has a polarized
plug (one blade is wider than the other).
This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
2-1
Operate cleaner only at voltage specified on data plate on
bottom of cleaner.
2. How to use
Cleaner description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
24
21
A
This cleaner is intended for household use.
Self-propel feature
This feature allows you to control how
quickly the cleaner moves.
Note: The self-propel feature oper-
ates only when the cleaner switch
and the self propel button are both
ON.
To move forward, push handle for-
ward and guide cleaner away from you.
To move backward, gently pull handle
back and guide the cleaner toward you.
Guide cleaner carefully at first until you
have adjusted to the ease of operation.
For increased control in tight places
(e.g., around and under furniture, non-
carpeted floors), slide the self-propel
button to OFF to deactivate the feature.
Transporting cleaner
To move your cleaner from room to
room, put handle in upright position, tilt
cleaner back on rear wheels and push
forward.
2-4
Continued
➜
23
22