Filter
Top Products
Unpacking
3
4
Unpack cleaner from carton and
identify parts shown.
A. Handle Section
B. Cleaner Body
C. Hose with tool (some models)
D. Nozzle
The assembled cleaner will look
like the drawing below.
1-800-944-9200 for an automated referral of
authorized service outlet locations (U.S. only)
A
B
C
D
This cleaner is
intended for house-
hold use.
ON-OFF/Speed
selector switch
Dirt cup
Hose hook
(some models)
Hose
(some models)
Cleaner body
Carrying
handle
DELUXE
WHEELED
NOZZLE
DELUXE
NOZZLE
STANDARD
NOZZLE
Cord hook
CORD HOOKS
HOSE
MODELS
TAB
SLOT
Questions or Concerns?
The Hoover Company wants to quickly resolve any concerns about
your cleaner or questions regarding its use. Look on the list pro-
vided with the product for your local Hoover Factory Service
Center or in the Yellow Pages under “Vacuum Cleaners - House-
hold” for the nearest Authorized Hoover Warranty Service Dealer
(Depot) or call:
OR
1-330-499-9499 to speak with a representative in the
Hoover Consumer Response Center.
DO NOT RETURN THIS PRODUCT TO THE STORE OR SEND IT
TO NORTH CANTON FOR SERVICE.
2. For attached hose models, place
hose hook on handle by first
inserting tab into slot.
3. Insert screw and secure handle
to cleaner body.
Continued
➜
Depending on the model you purchased,
ONE of the above Rug/Floor Nozzles is
included with your cleaner.
How to assemble
Unpack cleaner and remove all
cardboard. Remove the tape
securing the hose hook and screw
to the handle. A Phillips screw-
driver is needed for assembly.
A. Attach handle
1. With cord hooks upward, slide
handle onto cleaner body.
!