Filter
Top Products
q
The
deep cleaner may also
be
lift-
ed
by placing
a
hand
under the
upper clean
solution
tank handle
as
shown.
El
’
When
the
recovery
tank
(lower
tank)
is
full
the
automatic
shutoff
mechanism
will
shut
off
the
deep
cleaner
suction
(suc-
tion will be noticeably reduced).
At
that time
the
red
float disk will rise
to
the
top
of
the
recovery
tank
lid
(E).
The
deep cleaner will
no
longer pick
up
dirty
solution
and
the
motor sound will
become noticeably higher in pitch.
When this happens turn deep cleaner
off and empty recovery tank before
continuing
use.
Check clean solution
tank
also;
it
may
need
to
be
refilled.
Agitator Speed selector
q
Your
‘SteamVac’
deep cleaner
has
three agitator
brush
settings.
HI
-
for
normal
cleaning
of
carpet
and
bare
floors
LO
-
for
gentle cleaning
of
carpets
and
bare
floors
OFF - for cleaning carpets
and
bare
floors
when
brushing
is
not
desired.
(Such
as
when
picking
up
liquid spills.
See
page
10.)
Slide selector
button
to
the
desired
set-
ting before cleaning.
Brush indicator
a
.
The
brush
indicator will spin
(F)
when
the
deep cleaner
is
turned
ON
and
the
brushes
are
rotating.
If the indicator does not spin and the
pattern is visible (G) when the deep
cleaner is turned ON, the brushes are
not rotating.
There
are
three
reasons
why
the
brushes
may
not
be
rotating:
1.
Brush
speed selector set
on
OFF
(see
previous
section).
2.
Handle
in
upright position (see
“Cleaning
mode
indicator,”
p.
6).
3.
Brush
indicator screen
dirty.
q
To
clean
screen
(H),
turn deep clean-
er off and disconnect from electrical
outlet.
Remove
clear cover
and
wipe
off
screen
with
a
damp
cloth.
Snap
cover back
into
position.
The tanks
Clean solution tank
(upper tank)
The
clean
solution
tank
holds
the
clean-
ing
solution
that
is
to
be
dispersed
onto
the
surface
to
be
cleaned.
How to fill
Disconnect deep cleaner from
electrical outlet.
q
:
Place
deep cleaner handle
in
the
upright,
locked position.
To
remove
tank,
press
down
on
handle
and
pull
forward.
Carry
tank
to
a
sink.
Continued
+
7