Allied Telesis AT-2711FX/ST Network Card User Manual

Modifying Advanced Properties
Speed & Duplex
The Speed & Duplex feature sets the link speed and duplex mode of the
When you change the duplex mode of the adapter, change the
duplex mode of the link partner, such as a switch. The mismatch
duplex mode may degrade performance and cause CRC errors.
To change the Speed & Duplex property, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 76.
2. Select Speed & Duplex in the Property box.
The Speed & Duplex page is displayed as shown in Figure 59.
Figure 59. Speed & Duplex Page