Filter
Top Products
Assembly
I.
Remove bright plated (top)
screw from back of tank housing.
2. Position handle as shown lining
up holes. Push handle down firm-
ly into place.
Do not grip trigger
or twist handle while installing.
Insert screw and tighten.
3. The tank fits into the opening
in the front of the tank housing.
Place bottom of tank into posi-
tion; then push top of tank until it
clicks into place.
How to use
The control button
The control button, located on the handle, has three positions: “OFF”,
“SCRUB-POLISH-SHAMPOO”, “WET PICKUP.”
-
-
1. The unit is off
when the control
button is moved
back to the “OFF”
position.
2. To scrub, polish
or shampoo, move
the control button to
the right and then
forward to the
“SCRUB-POLISH-
SHAMPOO” posi-
tion.
3. For wet pickup,
move the control
button to the left and
then forward to the
“WET PICKUP”
position.
NOTE: Before changing from one position to the other, always return
control button to the “OFF” position.
5