Filter
Top Products
2. HOW TO OPERATE
Charge Battery
Charge battery fully before first
use. Fully discharged battery
will take up to 3 hours to
charge.
NOTE: See battery and
charger manual for battery
charging instructions.
Use only manufacturer’s
supplied or recommended
battery and charger.
Insert Battery
Insert charged battery into
battery cavity until latch is
locked into place.
NOTE: When inserting and
removing battery, ensure the
switch is in the off position
marked “O”.
ON/OFF Switch
To turn vacuum on, roll
switch forward to position
marked “I”.
Remove Battery
To remove and charge battery,
pull on release lever located
on end of battery and pull out
gently.
Attachments*
*Available on BH50030 Hand Vac with Pet Tools.
2.1
2.2 2.3
2.4
2.5
2.6
2.7
CREVICE TOOL
Push Crevice Tool forward to
release.
Pivot Crevice Tool up and
lock into place.
BRUSH TOOL
Pull brushes forward on Crevice
Tool to reveal Brush Tool.
Reverse steps 1-3 to store
Crevice or Brush Tool.
2.8
2.9
LiNX
TM
Power Head
Align pins on LiNX
TM
Power
Head with small openings on
nozzle and insert until securely
in place. To utilize LiNX
TM
Power
Head pivot feature, move
handle in a vertical motion while
cleaning. Pull out to remove.
ADDITIONAL PET TOOLS
Slide tool with Hoover
®
logo
facing up into nozzle until
locked securely in place. To
remove, pull tool directly out.
WARNING: Remove battery before inserting or
removing all attachment tools.
CAUTION: Not recommended for use on leather.
CAUTION: Not to be used for grooming a pet.
Integrated Tools