Filter
Top Products
Instructions for Use
1. Before assembling the vacuum cleaner, confirm all parts and components
for the cleaner are included by referring to Parts and Components List.
2. Ensure the cleaner is not connected to the power supply when assembling.
Hose Assembly
Insert the hose into the dust canister inlet in a
horizontal direction. Ensure the two projecting parts
align and gently insert. Turn the hose right when it
is fully inserted, it should make a click sound when
correctly inserted.
Assembly and Removal of the Dust Canister
Place the bottom of the dust canister on the projecting
part at the front end of the cleaner, and press down the
dust canister. When the front-end hook is entered into
the corresponding part of the cleaner completely, and a
click sound is heard, the dust canister is correctly inserted.
To remove the dust canister, press down the handle of
the dust canister; when the handle is pressed down to
the bottom, the dust canister can be lifted off the cleaner.
Telescopic Rod and
Floor Head Assembly
Insert the front end of the hose handle into the
telescopic tube. Then insert the other end of the
telescopic tube into the rounded inlet of the floor head.
To remove the dust canister, press down the handle
of the dust canister; when the handle is pressed
down to the bottom, the dust canister can be lifted
off the cleaner.
Instructions for Use (continued)