Filter
Top Products
Turning off the cleaner and storing
1. Remove from the mains power supply
and allow the cleaner to cool completely,
Turn the filler cap slightly to release the
remaining pressure.
Caution: The filler cap may be hot to touch,
wait for the filler cap to cool before touching.
2. Before storing, ensure the water tank is
completely empty .and then replace the
filler cap tightly to store.
Warning : The filler cap will not open if
steam pressure is still in the boiler!
Assembling the accessories
1. Assembling the straight nozzle and hose:
Connect the straight nozzle to the steam
socket on the front of the cleaner by
aiming the arrow mark on the nozzle to
the line on the socket . To do this, turn the
nozzle 90 degrees in a clockwise direction
and securely attach it to the body of the
cleaner. Turn the nozzle 90 degrees in an
anti-clockwise direction when detaching
the nozzle from the socket.
To detach the hose, follow the above
steps, press the unlock button and turn
90 degrees in an anti-clockwise direction,
then gently pull until it releases.
Instructions for Use (continued)
WARNING:
If soap or perfume is not required, ensure the dial is set to the off position.
1
1
2
2
11304_HV_Heritage_5620_HandiSteamer_Manual_FA.indd 12 26/08/11 10:32 AM