Filter
Top Products
Maintenance
Maintenance
Cleaning and changing parts
Dust cup and lter system cleaning
1. Push the button to release the dust cup from
the hand vac
2. Take the dust cup (as shown), pull back the clear
cover to pour out dust. Close the cover.
3. Remove the HEPA filter from the side of the
dust cup and replace with a new HEPA filter.
Dust cup assembly
Dust cup release
Cyclone cover
Cyclone cone
HEPA
Dust cup
Filter assembly
Turbo brush cleaning
1. Use a screw driver to rotate the
locking button.
2. Remove the cover, take the roller
out and clean it gently by removing
all dust, dirt etc. (do not clean with
water or any liquids). The roller can
also be replaced with a new roller
if necessary.
3. Re-assemble the roller and cover
after cleaning or replacement.
Locking button
for the cover
Cover
Roller