Filter
Top Products
Instructions for Use
Instructions for Use
Always remove the plug from the power socket before fitting or removing accessories!
Assembly
1. Fix the handle on the base body, and ensure
pins have clicked into place.
2. Attach the motorised head
to the body.
Use of 2 in 1 Accessory
This cleaner comes with a
2 in 1 accessory:
Crevice Tool – to clean in between
tight spaces.
Upholstery Tool – for cleaning
upholstery.
Assembling the hose
and handle attachments
1.
Depress the button at the base of the hose to
release the hose from the body of the cleaner
and gently pull the hose out of the cleaner.
2.
Insert the hose into the hole under the
handle. Detach the handle from the body of
the cleaner by depressing the button at the
base of the handle and gently pulling the
handle assembly out of the cleaner.
3. When finished cleaning, reinsert the handle
into the body of the cleaner. To remove the
hose from the handle, depress the buttons
below the handle and gently pull the
hose from the handle assembly. Reinsert
the hose into the hole on the body of the
cleaner, a click can be heard when correctly
assembled. Ensure the hose is hooked over
the top of the hose support when using in
the upright position.
The floor head is ideal for
cleaning on carpets and
hard floors.
Carpet Hard Floors