Filter
Top Products
Maintenence
Cleaning and changing the filter
Ensure the cleaner is not connected to the mains power when performing any maintenance duties.
• The air inlet lter should be cleaned at least twice a year or when it appears dirty.
• The HEPA air inlet lter should be cleaned when it appears dirty.
• Always operate the cleaner with lters and HEPA installed to prevent damage to the motor
or decreasing suction performance.
• Do not use a washing machine to rinse the lter.
• Do not use hair dryer to dry the lter.
1. Cleaning and changing the air inlet filter
and HEPA filter
a. Remove the dust canister from the unit .
b. Remove the HEPA bracket as shown.
c. Rinse the HEPA filter and the sponge
in warm water, allow to dry thoroughly
before reassembling.
d. Reassemble the HEPA filter and sponge back
the vacuum. Alternatively, replace the HEPA
filter and sponge with new ones.
2. Changing the air outlet filter.
a. Open the grille for the air-outlet at the rear
of the cleaner.
b. Remove the air outlet filter and replace
with a new air outlet filter (Part Number
32200733).
c.
Close the grille for the air-outlet filter.
11447_HV_Heritage_5010_Manual_FA.indd 11 26/08/11 12:19 PM