Filter
Top Products
–21 –
Accessing Other Partitions
To Access Another Partition
Each keypad is assigned a default partition for display purposes, and will
show only that partition’s information. But, if the user is authorized, a
keypad in one partition can be used to perform system functions in other
partitions by using the GOTO command. Note that only those partitions
authorized and programmed by the installer can be accessed in this manner.
To GOTO another partition:
READY
1. Enter your security code, then press ✳ + partition number (0-8).
Entering partition number 0 will return the keypad to its original
partition.
2.
LOG-ON TO AAAA
PART. X COMPLETE
The keypad will remain in the new partition
until directed to go to another partition, or
until 2 minutes has elapsed with no keypad
activity.
AAAA = alpha descriptor programmed by the
installer
X = partition number
Global Arming
The Global Arming option may have been programmed for use by some users.
If Global Arming was enabled for use with your security code, a keypad
prompt (message) will appear after pressing one of the arming function keys
(Stay, Instant, Away, Maximum, Off). Follow the keypad prompts to continue
arming the system. See your installer for detailed instructions on the use of
this feature.
If global arming does not apply to your security code, use the procedures
described in the following pages.