Filter
Top Products
– 7 –
System Overview (cont’d)
Function Keys
• The “A,” “B,” “C,” and “D” keys can be programmed to perform various functions.
• Functions include: activate a panic alarm, arm the system, provide step arming,
switch lights on/off, send a message to a pager, display Time/Date, and start a
programmed Macro sequence.
Paging Feature
• If programmed, the system can automatically send certain system condition
messages to up to four (VISTA-20P Series) or two (VISTA-15P Series) pagers.
• The pager displays code numbers identifying the type of condition that has occurred.
Scheduling
• Your system can be programmed to automatically perform certain functions (e.g.,
arm the system) at a predetermined time each day.
Using the Voice Message Center (if Voice Keypad is installed)
Voice keypads feature a voice message
center that lets you record and playback
one message.
• The message can be up to 2.5-minutes
long
• The message remains in memory until
a new message is recorded.
• The volume control is adjustable.
• Refer to the procedures below when
using the Message Center functions.
1
OFF
4
MAX
7
INSTANT
READY
2
AWAY
5
TEST
8
CODE
0
3
STAY
6
BYPASS
9
CHIME
#
ARMED
READY
6160V-003-V0
MESSAGE
MIC
SPEAKER
LCD
DISPLAY
FUNCTION
KEYS
MICROPHONE
LEDs
RECORD
VOLUME
PLAY
STATUS
VOICE
FUNCTION
Message Center Functions
To… Press these keys… Notes…
record a
message
#
FUNCTION
+
0
VOICE
+
1 OFF
RECORD
The red MESSAGE LED lights.
Message remains in memory until a
new message is recorded.
end
recording
1 OFF
RECORD
The red MESSAGE LED flashes,
indicating message waiting.
play a
message
#
FUNCTION
+
0
VOICE
+
3 STAY
PLAY
The recorded message plays and the
red MESSAGE LED turns off.
adjust the
volume
#
FUNCTION
+
0
VOICE
+
2 AWAY
VOLUME
, then press
volume key [3] ↑ (up) or [6] ↓ (down)
Adjusting message volume also
adjusts status volume. Volume
cannot be adjusted while playing.