Honeywell VIA-30PSE Home Security System User Manual


 
–18–
ARMING ALL PROTECTION
WITH ENTRY DELAY ON
Using the
2 AWAY Key
BEFORE ARMING,
close all doors and windows
(see
CHECKING
FOR
OPEN
ZONES
on page 13)
Use this key when no one will be staying inside.
1. Enter your security code and press the AWAY key.
2. The keypad beeps twice and displays the armed message. The red ARMED indicator
lights.
3. You may leave through an entry/exit door during the exit delay period without causing
an alarm.
After the exit delay expires, the system arms and sounds an alarm immediately if a
protected window or non-entry/exit door is opened, or if any movement is detected inside
your premises.
You may re-enter through an entry/exit door, but must disarm the system
within the entry delay period to avoid an alarm.
THE AWAY KEY
ARMS THE ENTIRE SYSTEM
(INTERIOR AND PERIMETER),
BUT ALLOWS USE OF
THE ENTRY/EXIT DOOR.
TYPICAL DISPLAYS
"ARMED AWAY"
ARMED
***
AWAY
***
YOU MAY EXIT NOW
The message "you may exit now" changes to
ALL SECURE when the exit delay expires.
ALPHA
AWAY
AC
FIXED-WORD