Honeywell TH8320ZW1000 Thermostat User Manual


  Open as PDF
of 72
 
TH8320ZW1000
19
69-2485EFS—03
ENGLISH
In case of difficulty
Heating or
cooling system
does not respond
• PressSYSTEM to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
• PressSYSTEM to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
• Checkcircuitbreakerandresetifnecessary.
• Makesurepowerswitchatheating&coolingsystemison.
• Makesurefurnacedoorisclosedsecurely.
• If“Wait”isdisplayed,thecompressorprotectiontimerison.Wait
5 minutes for the system to restart safely, without damaging the
compressor.
Display shows
Fan Auto and On
or Auto and Circ
at the same time
• Thisisnormaloperation.Autoindicatesthethermostatisfollowingthe
programmedfansetting.IfAutoandOnisshown,thefanisscheduled
for“On”duringthisperiod(seepage7).
 previous next