Installation Guide
69-1920EFS—01 2
ENGLISH
MCR29435
M29433
Wallplate installation
1. Separate wallplate from thermostat.
2. Mount wallplate as shown below.
Drill3/16"holesfordrywall.Drill7/32"holesforplaster.
Wallanchors
Wallplate
Wirehole
Mounting screws
CAUTION: ELECTRICAL HAZARD
Cancauseelectricalshockorequipmentdamage.Disconnectpowerbefore
beginning installation.
MERCURY NOTICE
Ifthisproductisreplacingacontrolthatcontainsmercuryinasealedtube,donot
place the old control in the trash. Contact your local waste management authority for
instructions regarding recycling and proper disposal.
Pull here to remove wallplate
from new thermostat.
Remove battery holder. Insert reference card after wallplate is
mounted(seeinstructions,below).
It's easier to grasp the wallplate
and remove it after completely
removing the battery holder.
MCR29434