Honeywell TH6000 Thermostat User Manual


  Open as PDF
of 80
 
FocusPRO
®
TH6000 Series
19 69-1921EFS—01
About your new thermostat
ENGLISH
In case of difficulty
Heating or
cooling system
does not respond
• PressSYSTEM button to set system to Heat. Make sure the temperature
is set higher than the Inside temperature.
• PressSYSTEM button to set system to Cool. Make sure the temperature
is set lower than the Inside temperature.
• Checkcircuitbreakerandresetifnecessary.
• Makesurepowerswitchatheating&coolingsystemison.
• Makesurefurnacedoorisclosedsecurely.
• Wait5minutesforthesystemtorespond.
“Cool On” or
“Heat On” is
flashing
• Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 15).
 previous next