Filter
Top Products
5
69-0803—1
depending on the outside temperature
and your furnace response time, to give
the furnace a head start to heat the
house before you arrive home.
SLEEP is the time period you can set for an
energy-saving temperature while you are
sleeping. (For more comfortable sleep-
ing, some homeowners choose not to
raise the cool temperature during the
night.)
Set one schedule for weekdays and another for
weekends according to your personal Program
Schedule because your requirements are
probably different for each. Also, during
weekends, only the WAKE and SLEEP time
periods are available.
Fill in the times and temperatures you desire
for weekdays and weekends. If you decide not
to program the thermostat, it automatically
controls heating at 68°F (20°C), and cooling at
78°F (26°C), 24 hours a day. Also, you do not
need to enter a time and temperature program
for all periods if your schedule does not require
it. For example, a zone that is occupied during
weekdays only requires programs for WAKE
and SLEEP.
When pressing the keys, use the ball of your
finger or a soft pencil eraser.
NOTE: Using sharp fingernails or pencil
points can damage the keypad.
If you make an error at any time during
programming, press the Run Program key,
and continue again at the last step.