19
69-1153
your utility company. If you notice the tempera-
ture in your home is higher or lower than the
setting you programmed into the thermostat,
check the thermostat display. To indicate the
equipment is under DLC, the thermostat displays
the word SAVING. You cannot control the
heating/cooling equipment when it is under DLC.
When the utility releases your thermostat from
DLC, your heating or cooling equipment may not
be immediately available. To prevent damage to
your heating and cooling equipment and to allow
the utility to bring the equipment on-line effec-
tively of all homes that subscribe to DLC, your
thermostat automatically calculates and initiates
a time delay before the heating or cooling
equipment comes on. You cannot override this
time delay.
Time-of-Use Pricing
If you subscribe to Time-of-Use Pricing, the
thermostat displays the rate in effect, see Fig. 1.
You cannot adjust which rate is in effect; you can
only adjust the temperature offset value for each
rate. Refer to Programming Your Thermostat
section for information on setting the offset value
for Time-of-Use Pricing. To notify you a rate
change will be occurring, the Time-of-Use
indicator on the thermostat begins blinking one-
half hour before the rate change takes effect.