Filter
Top Products
63-4356—1 6
The program has four temperature settings, Occupied
and Unoccupied heat and cool. The thermostat will
operate at the Unoccupied temperature setting
unless the thermostat is programmed. The following
chart shows the default temperature settings.
Occupied
Setpoint
Unoccupied
Setpoint
Control Default Desired Default Desired
Heating 70°F
(21°C)
55°F
(13°C)
Cooling 78°F
(25.5°C)
90°F
(32°C)
Setting Current Day and Time
ᕡ Press Set Current Day/Time.
NOTE: On initial power up or after an
extended power loss, 1:00 pm flashes
on the LCD until a key is pressed.
M4951B
Set Current
Day/Time
Set Program Set Temperature Change
Time/Temp
Occupied
Temp
Unoccupied
Start Time Day
System Fan
Copy
Occupied
Start Time
Run
Program
Temporary
Occupied
Continous
Unoccupied
Set Current
Day/Time
Clear
Start Time
Unoccupied
Temp
Heat/Cool
Settings
Mon
PM
Set Day/Time