Filter
Top Products
31 69-1725-1
Step 11. Configure Installer Setup (Cont)
13. If you do not have a number 0190 on the left side of your
display, go to the next page.
14. If you have a number 0190 on the left side of your display, press
the Up or Down arrow to select your setting for Installer Setup
Number 0190.
15. After you select your setting, press the Up arrow key to go to
the next Installer Setup Number.
M22228
0190
UP
ARROW
DOWN
ARROW
SETTING
PRE
SS
T
O
EXIT
IN
S
TALLER
S
ET
UP
Installer
Setup
Number
Installer
Setup
Name
(Select Your Setting)
Settings
D
O
N
E
INSTALLER
SETUP
NUMBER
UP
ARROW
Heat Pump
Changeover
Valve
0 - Changeover Valve in Cooling --
Use this setting if you connected a
wire labeled O to the O/B terminal.
1 - Changeover Valve in Heating --
Use this setting if you connected a
wire labeled B to the O/B terminal.