Filter
Top Products
RTH6350/RTH6450 Series
25 69-2416ES—05
About your new thermostat
SETUP WIRING ASSISTANCE TROUBLESHOOTING
Leave metal jumper in place, connecting R & Rc
terminals.
If your old thermostat had both V and VR wires,
stop now and contact a qualified contractor for
help.
If your old thermostat had separate O and B
wires, wrap the B wire in electrical tape and do
not connect.
If your old thermostat had Y1, W1 and W2 wires,
stop now and contact a qualified contractor for
help.
If E and Aux terminals do not each have a wire
connected, use a small piece of wire to connect
them to each other.
5
Wiring—Heat Pump
Alternate wiring (for heat pumps only)
If labels do not match letters on the thermostat, check
the chart below and connect to terminal as shown here
(see notes, below).
Wiring complete, return to Step 8.
MCR31275A
E
55
4
2
AUX
XWFH
B
W1
W2
X2
L
OG
F
L
C
YR
R
VRM
VY1
B
X
R
YR
c
RcEGO/BAux