Filter
Top Products
RTH2310 Programmable Thermostat
13
4) While the time display is flashing, press or
to set the time (in increments of 15 minutes).
5) Press
P#.
6) While the temperature display is flashing, place
the System switch on Heat and press or
to set the heat temperature. Place the System
switch on Cool and press or to set the
cool temperature.
7) Repeat steps 2 to 6 to set another period.
8) Press
Exit.
To modify the schedule (cont’d)
Press to start programming
or to select another period
Press to select the days
Press to end programming
Press to erase (skip) the
displayed period
Press to set the time
or the temperature
Place on Heat when setting
the heat setpoint or on Cool
when setting the cool setpoint