Filter
Top Products
RLV4300
17
To program the two periods of the Economy mode:
1) Press the Mode button until Econo appears on the screen.
2) Press the Pgm button. Period 1 is displayed.
3) Press the Day button to set the start day of the displayed period.
4) Press the Hour and Min buttons to set the start time of the
displayed period.
5) Press the Up or Down button to set the temperature.
6) Press the Pgm button to select Period 2.
7) Repeat steps 3 through 5 to set Period 2.
8) Press the Ret button to end programming.
Temporary Override
You can temporarily override the current temperature using the Up or
Down button. The new setpoint will be used until the end of the current
period. Econo flashes during the override.
Economy mode (cont’d)
69-1918EF-03.book Page 17 Wednesday, March 20, 2013 4:24 PM