Honeywell RCWL3506A Door User Manual


 
Installation Instructions
69-2115EFS—05 2
Decorative Wire Free Chimes and Push
Checking Pack Contents
Chime
Bell push (for chime kit only)
CR2032 battery for bell push (for
chime kit only)
2 x fixing screws for push (for chime
kit only)
2 x fixing screws for chime
Wall plugs
Adhesive pad (for chime kit only)
You will need:
A Phillips screwdriver
A small flat bladed screwdriver
A 1/4-in. (6 mm) masonry drill
4 X LR14 ‘C’ Alkaline batteries
Safety
Before proceeding with the installation, please note the following safety warnings:
Always follow the manufacturer’s advice when using power tools and wear
suitable protective equipment (e.g. safety goggles) when drilling holes, etc.
Before drilling holes in walls, check for hidden electricity cables and water pipes.
The use of a cable/pipe locator is advisable if in doubt.
69-2115EFS_C.indd 2 12/17/2007 2:23:56 PM