Honeywell RCWL330A Door User Manual


 
Installation Instructions
69-2148EFS—01 10
Programming Procedure
Learn procedure
To enable your chime to learn the identity
of your bell push:
Press the l button and keep it
pressed. Each Icon will light in
turn. When the Icon you want is lit,
release the button.
While the Icon you have selected is
lit, operate your push. The chime will
sound. The Icon will flash.
Unlearn procedure
If you want to remove a push from the
chime’s memory:
Press the l button and keep it
pressed. Each Icon will light in turn.
When the Icon associated with the
push to be unlearned is lit, release
the button.
Press and hold both l & buttons
until a “beep” sound is heard.
69-2148EFS_A.indd 10 3/20/2008 9:34:24 AM