Filter
Top Products
Quick Installation Guide
6
1) Match each labeled wire with the terminal having
the same letter.
2) Loosen the terminal screws using a screwdriver,
insert the wires, then tighten the screws.
3) Push any excess wire back into the wall opening.
r
Connect Wires (typical wiring)
5.
Remove jumper
if you have both
R and Rc wires.
400-147-042-A (69-2336ES-01 RCT8100 TH147P Quick Installation Guide) ENG.fm Page 6 Thursday, October 1, 2009 10:36 AM