Filter
Top Products
– 20 –
Accessing Other Partitions
To Access Another Partition
Each keypad is assigned a default partition for display purposes, and will
show only that partition’s information. But, if the user is authorized, a
keypad in one partition can be used to perform system functions in the other
partition, by using the GOTO command. Note that only the partitions
authorized and programmed by the installer can be accessed in this manner.
To GOTO another partition:
READY
1. Enter your security code, then press 6 + partition number (0-2).
Entering partition number 0 will return the keypad to its original
partition.
2.
LOG-ON TO AAAA
PART. X COMPLETE
The keypad will remain in the new partition
until directed to go back to the original
partition, or until 2 minutes has elapsed with
no keypad activity.
AAAA = alpha descriptor programmed by the
installer
X = partition number
Global Arming
The Global Arming option may be assigned for use by some users. If Global
Arming was enabled for use with your security code, a keypad prompt
(message) shown below appears after pressing one of the arming function
keys (STAY, INSTANT, AWAY, MAXIMUM, OFF).