Filter
Top Products
EGPWS LINE MAINTENANCE MANUAL
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO.: 060-4199-180 REV: G SHEET 67 of 68
17 APPENDIX G: LONG LANDING MONITOR MAINTENANCE MESSAGES
TABLE G-1: LONG LANDING MONITOR MAINTENANCE MESSAGES
MAINT.
FUNCTION
MESSAGE
Except where noted, all maintenance
message voices are Male
NOTES:
All volume levels at same volume as
existing EGPWS Self-Test messages
Self-Test Level 1
“Runway Awareness Inhibited” (only if RAAS
enabled at same time as Long Landing Monitor)
Long Landing Monitor enabled, but the
advisories have been inhibited with the
activation of an external input/switch. NOTE –
the EGPWS does not support a dedicated Long
Landing Monitor inhibit, but activation of a
defined RAAS inhibit will also inhibit Long
Landing Monitor.
Self-Test Level 3
(Annunciated at
end of Selected
Options )
“Long Landing Enabled”
RCD Enable Key is set and loaded RCD
activates Long Landing Monitor function.
Self-Test Level 3 “RCD Part Number XXX-XXXX-XXX “
where X is the 10-digit installation-specific RCD
part number.
Allows verification that the correct RCD is
loaded into the EGPWS.
NOTE: Operators/Installers must refer to their Instructions for Continued Airworthiness (ICA) documentation to
identify the approved RCD configurations specific to their aircraft type/model having Long Landing Monitor
installed.