Honeywell HZ-519 Electric Heater User Manual


 
3
FAHRENHEIT/CELSIUS
BACK-LIT DISPLAY
REMOTE CONTROL OPERATION
Two (2) AAA batteries required.
The HZ-519 is compatible with a Basic or LCD
Remote Control which can be purchased sepa-
rately at:
www.honeywellconsumerproducts.com
The Remote Control works the same as the cor-
responding buttons on the Control Panel display
on the heater and will show the appropriate icons
when the various functions are activated.
POWER
MODE: SET TEMPERATURE
F/C Temperature
Display
F/C feature functions from only the Power or Set
Temperature screens.
Press the F/C button to toggle between Fahrenheit
and Celsius.
The Back-lit feature provides light to the heater dis-
play and functions in any power or mode setting.
Press the Back-lit button to toggle this feature on
and off.
Basic Remote
LCD Remote
Press Power once to turn the heater on.
Press Power again to turn the heater off.
Power
Press Mode until the Temperature icon blinks. The
current room temperature will appear.
Use the Up or Down arrows to set the desired temper-
ature.
The Temperature icon will stop blinking and the cur-
rent room temperature will reappear after the desired
temperature is set.
The heater will turn-off shortly after the desired tem-
perature is reached and the Power light above the dis-
play will blink.
The heater will turn back on when the room tempera-
ture drops approximately 2 degrees below the desired
temperature. The Power light will stop blinking and
will remain lit.
Basic Remote
LCD Remote
Adjust Up or
Down
Mode
Temperature
Power
Mode
F/C
Back-Lit
Power
Mode
F/C
Back-Lit
www.sylvane.com 1-800-934-9194
www.sylvane.com 1-800-934-9194