Honeywell HZ-510 Electric Heater User Manual


 
SAFETY FEATURES
This heater is equipped with several devices and features for added protection.
• A high temperature safety device (Hi Limit) prevents overheating of the heater.
• A back-up thermal circuit breaker.
• A motor thermal fuse that will shut down the motor should it operate at a higher than normal
temperature.
• A specially designed rubberized handle, which is cool to the touch and allows you to easily move your
heater.
TROUBLESHOOTING
If your heater shuts off unexpectedly, safety features may have been activated to prevent overheating.
If this happens:
• Be sure the power cord is plugged into a working electrical outlet.
• Check your Desired Temperature setting. The unit may be off because you have reached your Desired
Temperature setting.
• Check for any obstructions. If you find one, turn the heater OFF and unplug it. Wait at least 10 minutes
to allow the heater to cool completely before removing any obstruction. When done, plug in the heater
and follow the OPERATION instructions.
CONSUMER RELATIONS
Mail questions or comments to:
Kaz, Incorporated
Consumer Relations Dept.
250 Turnpike Road
Southborough, MA 01772
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST, RETURN
THE HEATER TO THE ORIGINAL PLACE OF PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO
OPEN THE HEATER YOURSELF, DOING SO MAY CAUSE DAMAGE TO THE HEATER OR PERSONAL INJURY
AND WILL VOID YOUR WARRANTY.
Call us toll-free at: 1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at: www.kaz.com
Please be sure to specify a model number.
HZ-510_OM_Rev1.qxd 6/22/06 10:59 AM Page 4