Honeywell HZ-339 Electric Heater User Manual


 
ELECTRICAL RATING
This product is rated 12.5 Amps (1500 watts) @ 120V, 60Hz.
CONSUMER RELATIONS
Mail questions or comments to:
Kaz, Incorporated
Consumer Relations Dept.
250 Turnpike Road
Southborough, MA 01772
Call us toll-free at: 1-800-332-1110
E-mail: consumerrelations@kaz.com
Or visit our website at: www.kaz.com
Please be sure to specify a model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST, RETURN
THE HEATER TO THE ORIGINAL PLACE OF PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO
OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE
TO THE HEATER OR PERSONAL INJURY.
TROUBLESHOOTING
If your heater shuts off unexpectedly, safety features may have been activated to prevent overheating. If
this happens:
• Be sure the power cord is plugged into a working electrical outlet.
• Check your Desired Temperature setting. The unit may be off because you have reached your Desired
Temperature setting.
• Check for any obstructions. If you find one, turn the heater OFF and unplug it. Wait at least 10 minutes
to allow the heater to cool completely before removing any obstruction. When done, plug in the heater
and follow the OPERATION instructions.
CLEANING AND STORAGE
We recommend that the heater be cleaned at least once a month and before off-season storage.
• Turn the heater OFF and unplug it. Allow it to cool completely.
• Use only a dry cloth to clean the external surfaces of the heater. DO NOT USE WATER, WAX, POLISH,
OR ANY CHEMICAL SOLUTION.
• Clean your heater using the above-mentioned steps, then pack the heater in its original container and
store in a cool, dry place.
• This heater does not disassemble.
SAFETY FEATURES
This heater is equipped with several devices and features for added protection:
A tip-over switch that disables the heater if accidently tipped over (HZ-341BW only).
A SafeGuard
Alert Heat Indicator Badge that indicates the grille is hot and should not be touched -
turns from black to red.
A high temperature safety control prevents overheating (Hi-limit).
A back-up thermal circuit breaker that will permanently shut down the heater should it operate at
higher than normal temperatures.
HZ-339_341_OM_Rev2.qxd 6/22/05 5:15 PM Page 5