Honeywell HW-500C Series Fan User Manual


 
INSTALLATION INSTRUCTIONS
17. This fan is rated for use as a window fan, however, we recommend that
during rain, the fan be removed from the window.
WARNING: To Reduce The Risk of Fire or Electric Shock, Do Not Use
This Fan With Any Solid-State Speed Control Device.
To attach side panels: line up the top “notch”
portion on the side of the fan (A) with the bottom of the
“groove” portion of the side panel (B) (Fig. 1). Slide the
panel down until firmly in place. If panel does not attach
easily, try placing it on the other side of the fan.
For Double Hung Windows:
Position the bottom of the fan in the window sill. Make
sure the power cord is hanging inside the room.
Hold the fan in place and lower the window to the top
of the fan. Be sure that contact is made with the window
guides (Fig. 2) on the top of the fan.
Push in or pull out the adjustable side panel as needed
to properly fit your window width.
For Casement Windows:
Open your window at least 12 wide.
Position your fan vertically in the window. Make sure
the power cord is hanging inside the room.
Hold the fan in place and slide the window shut so contact is made with the
window guide.
Note: If desired, you may use the side panels to fit the height of the window. Be sure
the non-adjustable panel supports the fan.
WINDOW
GUIDE
O
I
I
I
I
I
I
Fig. 2
Fig. 1
A
B