Honeywell HW-500 Series Fan User Manual


 
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including
the following:
1. Use this fan only as described in this manual. Other use not recommended
may cause fire, electric shock or injury to persons.
2. This product is intended for household use
ONLY and not for commercial,
industrial or outdoors use.
3. To protect against electric shock,
DO NOT immerse unit, plug or cord in
water or spray with liquids.
4. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of shock, this plug is intended to fit only one way in a polarized
outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT attempt to defeat this
safety feature.
5. Close supervision is necessary when any appliance is used by or near children.
6. Turn the fan to the
OFF position and unplug the fan from the outlet when not
in use, when moving the fan from one location to another and before cleaning.
7. To disconnect the fan, first turn control to the
OFF position, grip the plug and
pull it from the wall outlet. Never pull by the cord.
8. Do not operate the fan in the presence of explosive and/or flammable fumes.
9. Do not place the fan or any parts near an open flame, cooking or other
heating appliance.
10 Do not operate the fan with a damaged cord or plug or if the product malfunctions,
is dropped or damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended by the manufacturer may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall or ceiling.
15. Do not operate if the fan housing is removed or damaged.
16. A loose fit between the AC outlet (receptacle) and plug may cause overheating
and a distortion of the plug. Contact a qualified electrician to replace loose
or worn outlet.