Filter
Top Products
3 69-1506-4
OPERATING YOUR AIR CLEANER
IMPORTANT
If you have purchased an F112C or an F113C model, you will need to open
the air cleaner and remove the plastic packaging on the CPZ filter. To
reassemble the unit, follow the instructions in the Changing Your Filters sec-
tion.
Your air cleaner has a power cord that plugs into a 120 Vac electrical outlet. Before
plugging it in and operating your air cleaner, carefully read all instructions:
WARNING
Electrical Shock Hazard.
Can cause personal injury or equipment damage.
Do not use air cleaner with any solid-state speed control device.
Keep foreign objects from blocking the air outlets or intakes, or from entering
the ventilation or exhaust opening.
1. Be sure the unit is fully assembled and in an upright position before plugging it
in.
2. Do not use the air cleaner outdoors.
3. Place the air cleaner where the cord and unit are not obstacles to employee and
customer traffic flow.
4. Plug the air cleaner polarized plug (one blade is wider than the other) into the
polarized outlet as designed. Do not attempt to force the plug into the outlet;
reverse the plug and then if it does not fit into the outlet, contact a qualified elec-
trician.
5. If you must use an extension cord, use a heavy duty cord with adequate line
size.
6. Do not run the power cord under carpets or rugs.
7. Keep the cord away from hot surfaces.
8. Do not use the air cleaner where combustible gases or vapors are present.
9. Do not expose the air cleaner to rain or operate near water, in a bathroom, or
other damp location.
10. Do not sit, stand or place heavy objects on the air cleaner.
11. Always unplug when not in use and before servicing. To disconnect the air
cleaner, first turn the speed control to the Off position before removing the plug
from the outlet.
12. Do not use the air cleaner with a damaged cord or plug or if the unit was
dropped, damaged or is malfunctioning.