Filter
Top Products
5 69-1506-4
IMPORTANT
Replace the HEPA filter and CPZ canister every one to three years, depend-
ing on the environment where the air cleaner is operating.
Changing Your Filters
CAUTION
Electrical Shock Hazard.
Can cause personal injury or equipment damage.
Disconnect power before servicing equipment.
NOTE: No tools are required for disassembly or assembly.
1. Disassemble the unit as follows (see Fig.1):
a. Loosen the carrying handle by turning it counterclockwise.
b. Lift the grille cover from the unit.
c. Lift the HEPA filter with carbon prefilter from the base.
d. Remove the CPZ canister, if applicable.
e. Remove the two velcro strips from the top and bottom of the prefilter and
remove it from the HEPA filter.
f. Wrap the new prefilter around the HEPA filter and replace the top and bottom
velcro strips.
2. Reassemble the unit as follows:
a. Place the assembled HEPA filter with carbon prefilter on the base.
b. Replace the CPZ canister, if applicable.
c. Replace the grille cover.
d. Reattach the carrying handle and turn it clockwise until securely tight. Be
sure not to over-tighten.
Table 1. Selecting Your Replacement Filters.
Air Cleaner
Model No.
Prefilter
Part No.
HEPA Filter
Part No.
CPZ Canister
Part No.
F112A6003 38002 21500 N/A
F112C6001 38002 28720 32000232
F113A6001 38002 24000 N/A
F113C6009 38002 28600 32000231