Filter
Top Products
69-0862—23
Programming Your Thermostat
When batteries are installed, your thermostat
can be programmed in your hand before it is
installed or after it is mounted on the wall. For
instructions on installing or replacing the
batteries, refer to the Maintaining Your Thermo-
stat section.
Refer to the personal Program Schedule on
page 3 to program your time and temperature
settings for various times of the day.
Four time periods are available during
weekdays — WAKE, LEAVE, RETURN, and
SLEEP. During weekends, only the WAKE and
SLEEP time periods are available. View these
periods individually on the display when you
press the Set Schedule key.
WAKE is the time the thermostat turns on
the heating/cooling equipment after an
energy saving period. When deciding
what time to set for your WAKE period,
include extra lead time, depending on
the outside temperature and your
furnace response time, to give the
furnace a head start to heat the house
before you get up. (This will be a higher
temperature during heating season, and
a lower temperature during cooling
season.)
LEAVE is the time period you can set for
an energy-saving temperature while you
are away at work or school. (This will be
a lower temperature during heating
season, and a higher temperature
during cooling season.)