Honeywell B/Q682 Thermostat User Manual


 
15 69-0563—2
Troubleshooting (continued)
(continued)
2
Problem Check Action
No heat (continued). other problem. Contact a qualified service technician for
assistance.
Energy savings
temperature program
12 hours off.
program dial for proper day or
night phase.
Turn timer ahead 12 hours. Move setting knob
clockwise only.
Rooms do not warm
up at programmed
time.
timer program for heating
system. May need more time to
warm up rooms.
Move red pin one-half hour earlier on the
program dial.
Temperature change
occurs at the wrong
time.
programs pins for correct time
locations.
Relocate pins to desired settings.
Room temperatures
are not correct.
positions of thermostat setpoint
levers.
Reset to desired temperatures.
position of subbase system
switch (heating-cooling model).
Move to desired operating position.