Honeywell 7300 Thermostat User Manual


 
INSTALLATION INSTRUCTIONS
Place Bar Code Here
62-2020-03
Wireless Communication Card for
TB7200/7300/7600 Series
Communicating Thermostats
APPLICATION
The Honeywell wireless communication card (TB-VWG-APP-1014)
and related WirelessStatNetwork.jar driver file are designed for use
with WEBs-AX controllers to integrate Honeywell TB7200, TB7300,
and TB7600 Series wireless thermostats into a WEBs-AX building
control system. This card allows the integrator to work in the familiar
Workbench tool set using any of the TB7200, TB7300, and TB7600
Series wireless thermostats.
The wireless communication card and TB7200, TB7300, and
TB7600 Series thermostats use ZigBee
®
wireless mesh. The
wireless thermostats are ideal for retrofit applications where the
addition of communicating field bus wiring in the building space is
difficult or cost prohibitive.
This document covers the mounting of the wireless communication
card in a WEBs-AX controller.
BEFORE YOU BEGIN
Included in the wireless card package you should find the following items:
The wireless communication card
A local antenna
A #2 phillips screwdriver is required for installation.
To add the Honeywell wireless thermostat network to a WEBs system, you need two .jar files for the WEBStation-AX.
You can download these files from the Honeywell Buildings Forum at buildingsforum.honeywell.com.
.Jar Files Needed:
Wireless Thermostat Network Driver: WirelessTstat.jar, version 4.0.4.8 or greater.
Wireless Thermostat Device and Point Configuration: Wireless TstatDevices.jar, version 4.0.4.8 or greater.
More Information
We recommend downloading the Honeywell Wireless Installation and Integration Reference Guide for the TB7200,
TB7300, and TB7600 Series Thermostats (Form No. 63-4522) from http://customer.honeywell.com before you begin
installation.