Filter
Top Products
- 4 -
Quick Reference (cont)
The following table lists the “Quick Commands” available with this control.
Key Description Keypads Comments
# 1
Quick Arm – if system is ready
All keypads Allows you to arm the system without requiring your
user code. User code is always needed to disarm
the system.
# 2
Force Arm – bypasses faulted
zones
All keypads Allows you to arm the system even if some zones
are faulted. These zones will be automatically
bypassed and will be unprotected.
BYPASS
nn (zone no.)
Quick Bypass
All keypads If not enabled, requires user code with authority 1,
2, or 3.
# 3
Set Time and Date
All keypads May require user code.
# 4
Zone Directory
LCD* only Lists each zone with its descriptors. Mode
terminates after last enabled zone.
# 50
Quick Help (OMNI624/848 only)
LCD* only Provides a listing of all quick commands available in
the system.
# 51
Show Time and Date
LCD* only May also require code.
# 52
Show Auto Arm Time
LCD* only May also require code.
# 53
User Event Log View
LCD* only Also needs user code with authority level 1 or 2.
# 54
Set Auto Arm Time of Current
Partition (OMNI624/848) or
System (OMNI400/600)
All keypads By partition (OMNI624/848) or system
(OMNI400/600), may also require code.
# 55
Display Firmware Version
LCD* only Displays panel’s revision.
# 56
Display Key Fob Low Batteries
(OMNI624/848 only)
All keypads Wireless Key Fob battery test.
# 57
Door Strike
All keypads Activate doorstrike or trigger. May require certain
user code.
# 58
Change/View Pager Number
All keypads For keypad partition (OMNI624/848) or system
(OMNI400/600), only LCD* shows phone number.
# 6
Display/Toggle Chime Mode
All keypads LCD* displays current state first, then offers to
toggle. All others just toggle the state.
# 7
Assign User to Other Partition
or to Activate Paging
(OMNI624/848 only)
All keypads Need user auth. of 1 or 2. Digit 4 (P) enables user
to page.
Paging must be enabled and turned on.
# 8
User Page Toggle
All keypads Toggles if users should send page for
Open/Close by partition (OMNI624/848) or by
system (OMNI400/600).
# 9
User On-line
All keypads Connects to downloader while on line, disconnects
home phone.
# 0
Multi-Partition (OMNI624/848
only)
All keypads LCD* displays current enables, 1, 2, 3 – P = 4
NOTE: An entry of 3 is available for the OMNI848
only
* 2-line alpha display