Filter
Top Products
5
MICROMAX SETTING OPTIONS
Setting with the MicroMAX Cards
The MicroMAX user cards can be used to set the system. This is done by assigning a MAX
user card (or fob) with one of the setting options. When the MAX card is held against a MAX
module for three seconds, the MAX function is activated. For example, if the MAX function
assigned is 13 = Part Set, then activating the card held function results in the system being
part set.
If a user is assigned group choice, then a keypad will have to be accessed to select the group
for setting after swiping the card.
Dual Focus
If a # is assigned to a particular users pin and their max card number, then the user will have
dual focus operation. This means that they will have to enter their pin first, before setting with
the max card and vice versa.
Proximity Keypads
A proximity keypad is a keypad that has a card reader built in. They are normally installed on
systems where dual focus setting and unsetting are used. Proximity keypads are used as a
keypad and microMAX as detailed above, but the card is held against the lower right corner of
the keypad as shown in the following diagram:
GALAXY 504 V4.00
08:58 TUE 22 NOV
1
2
3
A
4
5
6
B
7
8
9
ent
*
0
#
esc