Honeywell 3-144C Home Security System User Manual


 
19
Modify Type
Each user is assigned an access type which determines the menu
options available to the user (see Table 1. Menu Options). On selecting
this option, enter the type to be assigned to the user and press the ent
key to accept the programming and return to the previous menu level.
See Table 3. User Access Levels, for access availability.
• Duress Code
If the # key is pressed while Modify Level is accessed, then the
current code is assigned as a Duress Code. There is no limit to the
number of codes which can be assigned as Duress. Entering a duress
code at any time activates outputs programmed as Duress or PA.
Any valid PIN followed by # # ent (the ent key can be replaced by
either the A> or <B key) can be used as a Duress Code. This is
disabled in the UK to comply with regulations.
Table 3. User Access Levels
1-13105NE
leveL
epyTytilibaliavAsseccA
1†0.1drauGnoitporehtoonyromemtneveotnideretnE
2†1.2renaelCmetsysehttesyl
nonaC
2†2.2rekateraCmetsysehttesnudnatesylnonaC
23.2sresU91-11snoitpouneM
24.2sresU92-11snoitpouneM
25.2sresU93-11sno
itpouneM
2‡6.3reganaM94-11snoitpouneM
3‡7.3reenignE17-11snoitpouneM
3‡8.3etomeR17-11snoitpouneM
snoitcnufunemots
seccaoN
sedoceerhttsaleht(sedocetomerdnareenigne,reganamehT
.demmargorperebtonnachcihwsepytdexifevah)me
tsysehtno
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
PIN + ent
ent
CODES
1 = User Codes
ent
[ent] to Select
1 = Modify PIN
ent
>A
[ent] to Select
2 = Modify Level
ent
001 Level
>_3
ent
001 USER
L3