Honeywell 1EN2R-9005 0406R3-NE Thermostat User Manual


 
3 EN2R-9005 0406R3-NE
DESCRIPTION
The L41../L61.. series aquastats are sensitive water tempera-
ture control, which are provided with a liquid filled sensing sys-
tem.
The following main types are available:
Single, panel mount immersion
Aquastat with remote bulb to select the most favourable
position on a boiler or vessel.
Single, direct mounted immersion
Aquastat with insulating cover to protect against accidential
touching of live parts.
Dual, direct mounted immersion
Dual Aquastat and consisting of two basic single units,
which are mounted together and protected by one common
cover and using one well for the two sensors.
Single, surface mounted
The sensor of this type is to be mounted directly on the
surface of a boiler or pipe in a heating system. The
Aquastat mechanism is directly attached to this sensor.
The L41../L61.. series aquastats are primarily designed for
application on water filled heating systems and systems for hot
water supply, mainly domestic use.
The L41../L61.. series aquastats can be divided in the
following main types:
Controller
Controls the water temperature in accordance with the
setting of an external knob (TÜV-type TR)
Recycling limit control
Limits the water temperature below or above an adjusted
level and resets automatically. This type has a greater
differential and no external knob (TÜV-type TW).
Thermal cut-out with external reset button
(manual reset)
Limits the water temperature on a maximum adjusted level.
This type does not reset automatically and it does not have
an external knob.
Thermal cut-out with internal reset button (tool reset)
Limits the water temperature on a maximum adjusted level.
This type does not reset automatically and it does not have
an external knob.