Honeywell 121371B Plumbing Product User Manual


 
IMMERSION WELLS AND COMPRESSION FITTINGS
13 68-0040—04
CHECKOUT
When installation is complete, check it as follows:
1. Visually inspect the fittings in hydronic applications for
leakage.
2. If necessary, tighten these fittings.
3. Ensure excess capillary is coiled beneath the controller
case.
4. Ensure proper operation by observing the system
through one complete cycle.
CROSS REFERENCE
Some series 121371 Wells are also available without the
mounting clamp. These pairs are listed together in Table 1 and
in Table 7for your convenience. The cross reference in Table 8
lists wells and fittings no longer available and suggests
functional replacements.
Table 7. Wells With and Without Mounting Clamp.
121371 Part Number (With
Clamp)
Part Number
(Less Clamp)
121371A 123869A
121371B 123870A
121371M 123871A
121371N 123871B
121371P None
121371Q
121371L 123872A