Filter
Top Products
8 9
4. Place the tabs at the bottom of the grill cover into the
base of the unit. Gently push the grill cover plate back
into place until you hear a click sound indicating that
the grill cover is firmly latched. Fig. 4
Connect the power cord into a standard AC outlet.
NOTE: Unit will not operate unless filters and grill are properly installed.
1. On/Off and Speed Settings
• To turn the air cleaner on, press the ON/OFF
button on the control panel.
When the air cleaner is turned on, the ON/OFF button on the control panel
will illuminate and the air cleaner will start to operate on LOW speed. LOW is the
default speed setting when the air cleaner is turned on for the first time. Upon
restarting the air cleaner, fan speed will revert to the speed selected prior to turning
the unit off.
• Once the air cleaner is on, turn the dial clockwise until the MED setting illuminates
to increase the fan speed to MED. Turn clockwise once more to increase the fan
speed to HIGH setting. The fan speed dial turns continously in either direction to
adjust the fan speed. The dial surround illuminates to indicate the fan speed setting.
• To turn the air cleaner OFF, simply press the ON/OFF
button on the
control panel.
2. Oscillation
To activate the oscillation, press the
button. To stop oscillation, press the button
a second time. Unit will not automatically realign with foot when oscillation is stopped.
To achieve alignment, stop oscillation at the moment when the body becomes aligned
with the foot.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Cleaning the HEPA Filters
Make sure that the air cleaner is turned OFF and unplugged from the outlet before
cleaning.
1. Open the rear grill cover by gently pushing down
on the tab on the top of the grill cover. Fig. 5
2. Open the grill cover outward until the tabs at the
bottom of the grill cover easily slide away from the
unit. Fig. 6
3. Remove the HEPA filters from the main unit. Fig. 7
Note: There are two HEPA filters in this air cleaner.
4. Use the brush attachment with your vacuum
cleaner. Run the attachment along both sides of
the HEPA filters, cleaning thoroughly between the
accordion folds of the filters. Fig. 8